Severe Xtreme Duty Low Profile 4-IN-1 Multi-Purpose Bucket
Severe Xtreme Duty Low Profile Bucket 4-IN-1 Multi-Purpose Attachment is designed for rubber tire and rubber track host machines up to 130 horsepower. This bucket is available in 67″, 73″, 76″, 80″ and 84″ with the following options: bolt-on large teeth, weld-on teeth, bolt-on cutting edge, bolt-on tooth bar and extended tooth bar.
Product Features:
- For rubber tire or rubber track host machines up to 130 horsepower, and tractor loaders
- Low profile for improved load visibility
- Radius moldboard for improved material loading and unloading
- Pre-drilled 6” x ¾” front cutting edge to accommodate all bolt-on options
- Solid 6” x ¾” edge is attached to buckets with weld-on teeth
- Reversible bolt-on edge standard for dozer section
- Models include 67”, 73”, 76”, 80” and 84”
Front edge options:
- Bolt-on Large Teeth
- Weld-on Teeth
- Reversible Bolt-on Cutting Edge
- Bolt-on Tooth Bar
- Bolt-on Extended Tooth Bar
Related products
Industrial Tractor Loader Backhoe Construction Attachment 4-IN-1 Multi-Purpose Bucket
Duty Ratings, CAL Duty Ratings, Industrial, 4-In-1 Multi-Purpose Buckets, Industrial Tractor Loader Backhoes, All Products
Industrial Bucket 4-IN-1 Multi-Purpose construction attachment designed for industrial loaders and tractor loader backhoes. Pictured with optional swing-over pallet fork assembly. This bucket is available in 88" and 93" models with the following options: large bolt-on teeth and a reversible bolt-on cutting edge.
Note: Pictured with optional teeth
Product Features:
- For industrial loaders and tractor loader backhoes
- Radius moldboard for improved material loading and unloading
- Pre-drilled 6" front cutting edge to accommodate all bolt-on options
- Reversible bolt-on edge standard for dozer section
- Cast steel hinges with replaceable bushing
- Models include 88" and 93"
- Bolt-on reversible rear clam edge for 88" only
Front edge options:
- Large Bolt-on Teeth
- Reversible Bolt-on Cutting Edge
Severe Xtreme Duty High Capacity 4-IN-1 Multi-Purpose Bucket
Duty Ratings, CAL Duty Ratings, 4-In-1 Multi-Purpose Buckets, Rubber Tire Machines, Rubber Track Machines, Severe Xtreme, Skid Steer, Tractor Loaders, All Products
Severe Xtreme Duty High Capacity 4-IN-1 Multi-Purpose Bucket is designed for rubber tire and rubber track host machines up to 130 horsepower. This bucket is available in 80" and 84" models with the following options: bolt-on large teeth, weld-on teeth, bolt-on cutting edge, bolt-on tooth bar and extended tooth bar.
Product Features:
- For rubber tire or rubber track host machines, loaders up to 130 horsepower
- Radius moldboard for improved material loading and unloading
- Pre-drilled 6" front cutting edge to accommodate all bolt-on options
- Solid 6" edge is attached to buckets with weld-on teeth
- Reversible bolt-on edge standard for dozer section
- Models include 80" and 84"
Front edge options:
- Large Bolt-on Teeth
- Weld-on Teeth
- Reversible Bolt-on Cutting Edge
- Bolt-on Tooth Bar
- Bolt-on Extended Tooth Bar
Severe Xtreme Duty Low Profile General Purpose Bucket
General Purpose Buckets, Rubber Tire Machines, Rubber Track Machines, Tractor Loaders, All Products, Duty Ratings
The Severe Xtreme DutyTM Low Profile General Purpose Bucket Attachment is designed with a high-strength, abrasion-resistant front cutting edge pre-drilled to accommodate bolt-on attachment options and is designed for compatibility with rubber tire or rubber track host machines up to 130 horsepower. This bucket is available in 67", 73", 78", 84" and 88" models.
Product Features:
- For rubber tire or rubber track host machines up to 130 horsepower
- Extended bottom design provides front edge visibility for machine operator
- Radius moldboard for improved material loading and unloading
- Pre-drilled high-strength, abrasion-resistant front cutting edge accommodates all bolt-on attachments
- A solid 6" edge is attached to buckets with weld-on teeth
- Models include 67", 73", 78", and 84"
- Large Bolt-on Teeth
- Weld-on Teeth
- Reversible Bolt-on Cutting Edge
- Bolt-on Tooth Bar
- Bolt-on Extended Bar
Ultra Duty 4-IN-1 Multi-Purpose Bucket
Ultra Duty 4-IN-1 Multi-Purpose Attachment is designed for rubber tire and rubber track host machines up to 130 horsepower. This bucket is available in 73", 76", 80" and 84" models. Side cutters come standard.
Product Features:
- For rubber tire or rubber track host machines loaders up to 130 horsepower
- For harsh environments such as: gravel, concrete, etc.
- 5/16” moldboard and additional reinforcement on dozer for added strength
- 1”x6” front weld in cutting edge
- Side cutters come standard
- AR plate reinforced flat bottom
Xtreme Duty Agricultural High Capacity Litter Bucket
The XTREME Duty™ Agricultural High Capacity Litter Bucket for general purpose use on tractors and skid steer loaders. This attachment is ideal for snow removal, trash, dirt, chicken house cleanup and other job site debris. This bucket features a an optional side UHMW Rub Rail to protect the bucket and the objects that it comes in contact with. This agricultural tractor bucket attachment is available in 74", 84" and 93" models.
Product Features:
- Provides maximum capacity for trash, snow, or dirt
- Rub Rail installed to protect objects that will come in contact with the bucket, with a unique bolt pattern that allows complete use of all four edges before it is replaced
- Models include 74”, 84” and 93”
- Tractor Loaders or Skid Steer Loaders
Xtreme Duty Extended Bottom Low Profile General Purpose Bucket
The XTREME Duty™ Extended Bottom Low Profile General Purpose Bucket Attachment is designed with a high-strength, abrasion-resistant front cutting edge pre-drilled to accommodate bolt-on attachment options, and is designed for compatibility with rubber tire host machines up to 100 horsepower or rubber track host machines up to 80 horsepower. This bucket attachment is available in 62", 66", 72", 78" and 84" models.
Product Features:
- For rubber tire host machines up to 100 horsepower or rubber track host machines up to 80 horsepower
- Extended bottom design provides front edge visibility for machine operator
- Radius moldboard for improved material loading and unloading
- Pre-drilled high-strength, abrasion-resistant front cutting edge accommodates all bolt-on attachments
- A solid edge is attached to buckets with weld-on teeth
- Models include 62”, 66”, 72”, 78”, and 84”
- Bucket sizes 62” – 78” have a 5/8” x 6" welded cutting edge
- 84” buckets have a ¾” x 6" welded cutting edge
- Bolt-on Teeth
- Weld-on Teeth
- Reversible Bolt-on Cutting Edge
- Bolt-on Tooth Bar
- Bolt-on Extended Tooth Bar
Xtreme Duty Low Capacity 4-IN-1 Multi-Purpose Bucket
Duty Ratings, CAL Duty Ratings, 4-In-1 Multi-Purpose Buckets, Rubber Tire Machines, Rubber Track Machines, Skid Steer, Tractor Loaders, Xtreme Duty, All Products
Xtreme Duty Low Capacity Bucket 4-IN-1 Multi-Purpose Attachment is designed for improved material loading and unloading on rubber tire or track host machines up to 100 horsepower. These buckets feature radius moldboard, low profile and attachment options for bolt-on teeth, cutting edge, and tooth bar. This attachment is available in 60", 67" and 73".
Product Features:
- For rubber tire host machines up to 100 horsepower, or rubber track host machines up to 80 horsepower
- Radius moldboard for improved material loading and unloading
- Low profile for improved load visibility
- Reversible bolt-on edge standard for dozer section
- Pre-drilled 5/8” x 6” front cutting edge to accommodate reversible cutting edge or bolt-on teeth
- Maximum clamping force: 6,000 LBS @ 3,000 psi
- Models include 60”, 67” and 73”
Front edge options:
- Bolt-on Teeth
- Reversible Bolt-on Cutting Edge
- Bolt-on Tooth Bar
Xtreme Duty Standard Bottom Low Profile General Purpose Bucket
Duty Ratings, CAL Duty Ratings, General Purpose Buckets, Rubber Tire Machines, Rubber Track Machines, Xtreme Duty, All Products
The Extreme Duty Standard Bottom Low Profile General Purpose Bucket Attachment is designed with a high-strength, abrasion-resistant front cutting edge pre-drilled to accommodate bolt-on attachment options and is designed for compatibility with rubber tire host machines up to 100 horsepower or rubber track host machines up to 80 horsepower. This bucket is available in 62", 66", 72", 78", and 84" models.
Product Features:
- For rubber tire host machines up to 100 horsepower, or rubber track host machines up to 80 horsepower
- Standard bottom design increases front edge breakout force
- Radius moldboard for improved material loading and unloading
- Pre-drilled high-strength, abrasion-resistant front cutting edge to accommodate all bolt-on attachments
- A solid edge is attached to buckets with weld-on teeth
- Models include 62", 66", 72", 78" and 84"
- Bucket sizes 62", 78" have a 5/8" x 6"welded cutting edge
- 84? buckets have a 6" welded cutting edge
- Bolt-on Teeth
- Weld-on Teeth
- Reversible Bolt-on Cutting Edge
- Bolt-on Tooth Bar
- Bolt-on Extended Tooth Bar
- Large Bolt-on Teeth (for 84" only)
Reviews
There are no reviews yet.