Pirahna Forestry Mulcher
Product Features:
SINGLE SPEED DIRECT DRIVE MOTOR
15-50 GPM
A/R WARE PLATES
CASE DRAIN REQUIRED
SIDE PANEL OFFERS ACCESIBILITY TO HYDRAULICS
3 SECOND MOTOR RECOVERY TIME
30″CUTTING WIDTH
QC OR PIN ON HITCH
Related products
Bolt-On and Weld-On Teeth
Bolt-On Teeth are for use with all Construction Attachment general purpose and 4-in-1 multi-purpose buckets when digging, excavating or loosening compacted soil.
6BTCTE05: Regular Bolt on Tooth
GP: Compact 60” to 72” & Xtreme 62” to 78”
4in1: Compact 54” to 72” & Xtreme 60” to 76”
6BTCTE34: Large Bolt on Tooth
GP: Xtreme 84”, Severe Xtreme 67” to 88”, Ultra 73” to 84”
4in1: Severe Xtreme 67” to 84”, Ultra 73” to 84”, Industrial 88” to 93”
6BTCTE34: has replaceable tips & roll pin
6BTCTI01: AD-156 Tip
6BTCPI01: 156 Coil Roll Pin
6BTCTE06: GP & 4in1 Weld on Tooth
GP: Xtreme 62” to 84”, Severe Xtreme 67” to 88”
4in1: Xtreme 67” to 76”, Severe Xtreme 67” to 84”, Ultra 73” to 84”
6BTCTE06 has replaceable tip & pin
6BTCTI03: 8330 Tip
6BTCPI02: RP-H23 Rubber Flex Pin
Compact Snow Blade Specialty Attachment
Compact Snow Blade is a specialty attachment with a four-way blade capable of up to 30 degrees of angle (left or right) with a manual or optional hydraulic kit*. This snow/dozer blade is designed for use on compact tractor loaders and skid steers up to 50 horsepower with a 22.5" moldboard and a 75 degree angle of attack at grade level. Attachment is available in 60", 72" and 82" wide models, Manual or Hydraulic operation, and Steel or Rubber edge options.
Hydraulic Breakers – Mid & Large Excavators
Construction Attachments Hydraulic Breaker for Mid-Large Excavators are designed for construction and demolition of concrete structures, rocks, asphalt, and more.
Designed for aiding in construction and demolition of concrete structures, rocks, asphalt, etc.
- Constructed of high strength steel to provide structural durability
- Silence kit ensures noise protection, prevents dust and debris from entering breaker housing
- Cushion Damper provides protection to the host machine
- Auto Stop (Anti Blank Fire) System ensures less problem of the components and longer life of the breaker
- Specify make and model of host machine when placing order
- Weights may vary based on selected hitch styles
- Use of unsuitable hydraulic couplers or hoses can cause damage to internal components of breaker.
- Hydraulic lines < 60 gpm – use 1.0 inch lines AND > 60 gpm – use 1.25 inch lines.
- Dry firing hydraulic breaker can result in damage to internal components of breaker and host machine.
- Chisel paste must be used with hydraulic breakers, using high temperature grease as a substitution for chisel paste will cause damage to components of breaker.
- Consult with appropriately trained hydraulic specialists prior to placing breaker into service.
- Read operators manual before use.
- Check hydraulic flow and pressure before use.
- Instruct owner/operator on proper use of hydraulic breaker before delivery of machine or product.
