Xtreme Duty Walk-Through Regular and Heavy Lift Pallet Forks
Walk-Through Pallet Forks designed for loading, unloading and transporting bulky, baled or palletized material. 14″ opening with radius corners and over 15″ of headache rack on each side of the frame for payload support.
Related products
Bolt-On and Weld-On Teeth
Bolt-On Teeth are for use with all Construction Attachment general purpose and 4-in-1 multi-purpose buckets when digging, excavating or loosening compacted soil.
6BTCTE05: Regular Bolt on Tooth
GP: Compact 60” to 72” & Xtreme 62” to 78”
4in1: Compact 54” to 72” & Xtreme 60” to 76”
6BTCTE34: Large Bolt on Tooth
GP: Xtreme 84”, Severe Xtreme 67” to 88”, Ultra 73” to 84”
4in1: Severe Xtreme 67” to 84”, Ultra 73” to 84”, Industrial 88” to 93”
6BTCTE34: has replaceable tips & roll pin
6BTCTI01: AD-156 Tip
6BTCPI01: 156 Coil Roll Pin
6BTCTE06: GP & 4in1 Weld on Tooth
GP: Xtreme 62” to 84”, Severe Xtreme 67” to 88”
4in1: Xtreme 67” to 76”, Severe Xtreme 67” to 84”, Ultra 73” to 84”
6BTCTE06 has replaceable tip & pin
6BTCTI03: 8330 Tip
6BTCPI02: RP-H23 Rubber Flex Pin
Bolt-On Reversible Cutting Edge
Bolt-On Reversible Cutting Edges are designed to add protection and longevity to your original front edge on Construction Attachments general purpose and multi-purpose buckets. Made from high strength 1080 High Carbon Steel. Will fit Construction Attachment buckets with pre-drilled weld in edges based on bucket model.
Hydraulic Breakers – Mid & Large Excavators
Construction Attachments Hydraulic Breaker for Mid-Large Excavators are designed for construction and demolition of concrete structures, rocks, asphalt, and more.
Designed for aiding in construction and demolition of concrete structures, rocks, asphalt, etc.
- Constructed of high strength steel to provide structural durability
- Silence kit ensures noise protection, prevents dust and debris from entering breaker housing
- Cushion Damper provides protection to the host machine
- Auto Stop (Anti Blank Fire) System ensures less problem of the components and longer life of the breaker
- Specify make and model of host machine when placing order
- Weights may vary based on selected hitch styles
- Use of unsuitable hydraulic couplers or hoses can cause damage to internal components of breaker.
- Hydraulic lines < 60 gpm – use 1.0 inch lines AND > 60 gpm – use 1.25 inch lines.
- Dry firing hydraulic breaker can result in damage to internal components of breaker and host machine.
- Chisel paste must be used with hydraulic breakers, using high temperature grease as a substitution for chisel paste will cause damage to components of breaker.
- Consult with appropriately trained hydraulic specialists prior to placing breaker into service.
- Read operators manual before use.
- Check hydraulic flow and pressure before use.
- Instruct owner/operator on proper use of hydraulic breaker before delivery of machine or product.
Xtreme Duty Snow Blade Attachment
Xtreme Duty Snow Blade is a specialty attachment with a four-way blade capable of up to 30 degrees of angle (left or right) with a manual or optional hydraulic kit*. Designed for rubber tire skid steer, compact track loaders and tractor loaders up to 100 hp and a 30" moldboard. This dozer blade is available in either an 84", 93" or 108" wide model (7 - 9 feet wide), with Manual or Hydraulic operation. The blade also had an available Steel or Rubber edge option and a high visibility dozer guide for use and accuracy in low-light and high-snow conditions.
Xtreme Duty Tree Boom
Xtreme Duty Tree Boom manufactured in the USA by Construction Attachments, Inc. is designed for use on skid steer loaders and tractor loaders. This specialty attachment enables the operator to easily pick up trees to be planted, transported or loaded... perfect for landscaping, greenhouses, orchards and tree farms.